Brush Strip Seals

The versatility of Raven brush strip and ease of installation makes it particularly suitable for sealing difficult applications such as sliding, revolving, pivot, roll-up and panel lift type doors against smoke, odours, draughts, light, dust insects, bushfire embers and for the retention of air conditioning.

 

Raven nylon brush strip sealing is recognised as solving draught problems where heavy duty use is required in areas such as public transport applications.  Tests have proven that minimal wear occurs with prolonged use to either brush or contact surfaces.  Dense black nylon bristles are locked into a galvanised steel spine which is then generally fitted into an anodised aluminium holder.  The aluminium holder will take all bristle lengths, and the adhesive PVC foam tape is standard on most aluminium holders.  Raven brush strips are available without the aluminium holders. Specify for example RP57 (brush only).

 

Note:  Raven use special nylon filament due to its significantly superior performance over inferior materials such as polypropylene in these applications.  Raven nylon brush strip withstands temperatures up to 200°C for 30minutes without significant deterioration.

 

Raven brush strips are self extinguishing and comply with AS 3959 up to BAL FZ for vehicle access doors (garage doors).  Product selection should be made when assessing the mandated requirements listed in the AUS NCC BCA and the Australian Bushfire Standard AS 3959.

Specifiers will determine the suitability of the information provided when selecting a Raven seal for their purposes.

 

For medium temperature smoke door sealing refer to RP52F, RP74F and RP129F

 

For icon explanation and other product information, please click here.

RP41's image RP41's details
RP41
RP41
  • Location  Door bottoms, single, double, revolving or sliding and double acting pivot doors, lintels of roll-up doors
  • Min/Max Gap  30mm to 50mm
  • Seal Sizes  Available in stock lengths
  • Standard Finish  Aluminium anodised 15 microns.  Satin Clear (Silver) finish
  • Seal Material  Fine, dense, black nylon filaments, UV stabilised
RP49's image RP49's details
RP49
RP49
  • Location  Door frame, door stiles of sliding doors (user determined)
  • Seal Sizes  Available in stock lengths
  • Standard Finish  Aluminium anodised 15 microns.  Satin Clear (Silver) or Bronze finish.  P.E. Paint (at extra cost)
  • Seal Material  Fine, dense, black nylon filaments, UV stabilised
  • Fixing Method  Self adhesive backing.  Can screw fix
RP50's image RP50's details
RP50
RP50
  • Location  Can be used on panel lift doors.  User determined
  • Seal Sizes  Available in stock lengths
  • Standard Finish  Aluminium anodised 15 microns.  Satin Clear (Silver) or Bronze finish
  • Seal Material  Fine, dense, black nylon filaments, UV stabilised
  • Fixing Method  Self adhesive backing.  Can screw fix
RP52F's image RP52F's details
RP52F
RP52F
  • Location   Door bottoms or stiles of single, double, sliding or double acting doors
  • Min/Max Gap  Up to 13mm (user determined)
  • Seal Sizes  Available in stock lengths
  • Seal Material  Fine, dense, black nylon filaments, UV stabilised with medium temperature fin.  Galvanised steel spine
  • Fixing Method  Bowed and inserted in mortice groove (builder's adhesive if required)
RP57's image RP57's details
RP57
RP57
  • Location  Door bottoms, single, double, revolving or sliding and double acting pivot doors, lintels of roll-up doors
  • Min/Max Gap  30mm to 50mm (user determined)
  • Seal Sizes Available in stock lengths
  • Standard Finish  Aluminium anodised 15 microns.  Satin Clear (Silver) or Bronze finish.  P.E. Paint (at extra cost)
  • Seal Material  Fine, dense, black nylon filaments, UV stabilised
  • Fixing Method  Self adhesive backing.  Can screw fix
RP58's image RP58's details
RP58
RP58
  • Location  Door bottoms, single, double or sliding and double acting pivot doors.  Lintels of roll-up doors
  • Min/Max Gap  50mm to 75mm (user determined)
  • Seal Sizes  Available in stock lengths
  • Standard Finish  Aluminium anodised 15 microns.  Satin Clear (Silver) or Bronze finish.  P.E. Paint (at extra cost)
  • Seal Material  Fine, dense, black nylon filaments, UV stabilised
  • Fixing Method  Self adhesive backing.  Can screw fix